Industrial Lifting Magnet مگنت is a tool for lifting objects made of iron or steel or alloy compounds that are magnetized in a magnetic field. Industrial load magnets in different tonnages are often produced from 100 kg and for special uses, especially in container loading and loading barges, can reach a capacity of 100 tons. Magnets are tools that are used for loading in the shortest time and with the least amount of connections, which can be used not only under the capability of the industrial load magnet itself but also at a higher level under the influence of surface geometry, surface magnet مگنت attraction and surface thickness. Which is attached to it. Takin Boxel is an importer and supplier of various types of industrial load magnets with a weight capacity of 100 kg and above.
100 Kg lifting magnet is basically the lowest lifting capacity among the magnets. 100 Kg lifting magnet is suitable for lifting average weight metal plates, sheets and some industrial machines. depending on the surface quality and radius of surface the capacity of lifting magnet مگنت صنعتی can raise up to 2 times more or lower to even 70% lower than its nominal lifting capacity. there is a safety feature involved in producing high quality lifting magnets by reputable factories that is mostly higher than 5:2. this means in the lowest safety feature a 100 Kg lifting magnet should be tested for lifting 250 Kg weight but of flat surface and with high magnetic interest.
500 KG industrial magnet that is used in industries to lift metallic sheets. metallic blocks and heavy objects that are mainly used for recycling is available in various brands and made varying from China, Korea, Taiwan and even some European countries. However, the majority of available magnets in Iran are made in China. Industrial magnets are usually tested with at least 3 times their nominal capacity but for lifting a high magnetic metallic block with a very smooth surface that provides the highest contact but for this capacity with 1500 KG of weight. in most industrial applications such high surface contact and smoothness do not happen and therefore, such high safety feature is required.